QUESTION 141
A Cisco ACI fabric is created with a single L3Out with R1 and R2. The requirement is to prevent all received subnets from R1 and R2 from communicating. Which configuration accomplishes this goal?

A. Intra EPG isolation as Enforced
B. Intra Ext-EPG isolation as Unenforced
C. Intra EPG isolation as Unenforced
D. Intra Ext-EPG isolation as Enforced

Correct Answer: D

QUESTION 142
A QoS policy on Cisco UCS must meet these requirements:
1. No-drop class must be configured.
2. Jumbo frames must be enabled without fragmentation.

Which configuration must be implemented to meet these conditions?

A. Configure slow-drain timers and specify an MTU value of 9100 bytes.
B. Configure Platinum system class and specify an MTU value of 9100 bytes.
C. Create a Flow Control Policy and specify an MTU value of 900o bytes.
D. Create a QoS system class and specify an MTU value of 9216 bytes.

Correct Answer: D

QUESTION 143
What is a feature of EPLD upgrades on a Cisco Nexus 7000 Series Switch?

A. They are performed during an ISSU system and kickstart upgrade.
B. They are independent of the Cisco NX-OS ISSU process.
C. They do not cause service disruptions.
D. They execute simultaneously on multiple modules.

Correct Answer: B

QUESTION 144
An engineer must generate a checkpoint of the running configuration on a Cisco Nexus Switch. The checkpoint file name must be called “before_maintenance” and should be used for recovering the switch to its premaintenance state. The rollback of the checkpoint to running configuration should only occur if no errors occur. Which two configuration commands must be used to meet these requirements? (Choose two.)

A. checkpoint file before_maintenance
B. rollback checkpoint file before_maintenance stop-at-first-failure
C. rollback running-config file before_maintenance atomic
D. rollback running-config checkpoint before_maintenance
E. checkpoint before_maintenance

Correct Answer: AC

QUESTION 145
Which component is upgraded by using an EPLD upgrade on a Cisco Nexus 9000 Series Switch?

A. BIOS
B. dual-homed fabric extenders
C. ISSU of the NX-OS version
D. field-programmable gate arrays

Correct Answer: D

QUESTION 146
Which service profile is affected if the default host firmware policy in Cisco UCS Manager is changed?

A. any service profile that has no host firmware policy defined
B. any service profile that uses the global-default host firmware policy
C. any service profile that is not in the root sub-org
D. any service profile that uses a user-created host firmware policy

Correct Answer: A

QUESTION 147
Which NFS version uses the TCP protocol and needs only one IP port to run the service?

A. NFSv1
B. NFSv2
C. NFSv3
D. NFSv4

Correct Answer: D

QUESTION 148
An engineer is configuring AAA authentication on an MDS 9000 switch. The LDAP server is located under the IP 10.10.2.2. The data sent to the LDAP server should be encrypted. Which command should be used to meet these requirements?

A. ldap-server host 10.10.2.2 key SSL_KEY
B. ldap-server 10.10.2.2 key SSL_KEY
C. ldap-server host 10.10.2.2 enable-ssl
D. ldap-server 10.10.2.2 port 443

Correct Answer: C

QUESTION 149
Several production and development database servers exist in the same EPG and IP subnet The IT security policy is to prevent connections between production and development. Which attribute must be used to assign the servers to different microsegments?

A. data center
B. VMM domain
C. MAC address
D. IP address

Correct Answer: C

QUESTION 150
An engineer must configure SAN connectivity in Cisco UCS Manager. The requirement is to specify the WWPN of the storage array and set the zoning type to Single Initiator Multiple Targets. The engineer must also configure interrupt handling and queues of the vHBA interface. Which two Cisco UCs policies should be used to configure the settings? (Choose two.)

A. storage connection policy
B. Fibre Channel adapter policy
C. vHBA policy
D. boot policy
E. SAN connectivity policy

Correct Answer: AB

QUESTION 151
A SAN administrator receives reports about latency and response-time issues that impact various applications. The incidents have gradually increased in frequency and severity and have reached a critical state. Which DCNM configuration set identifies the source of the issues?

A. Events
Time Now
Select MDS Switch
Advanced Filter/Source
B. SAN Insights
Storage Enclosure
Select Host/Initiator-Target Pair
C. Slow Drain Analysis
Duration Once/Run Immediately
Start/Stop Collection
Current Jobs/Result
D. FC Flows
Interval 24 Hours
Export/Save

Correct Answer: C

QUESTION 152
An engineer must migrate a Cisco UCS C-Series server from Cisco SingleConnect to direct connect integration mode. The Cisco UCS Manager Rack Server Discovery Policy and Rack Management Connection Policy are set to Immediate and 2accomplishes this task?

A. Disconnect the cables from the FEX
Connect the cables to server ports on the fabric interconnect.
Reacknowledge the server.
B. Disconnect the cables from the FEX.
Connect the cables to server ports on the fabric interconnect
Reset the Cisco IMC of the server.
C. Disconnect the cables from the FEX
Connect the cables to appliance ports on the fabric interconnect
Reset the Cisco IMC of the server.
D. Disconnect the cables from the FEX.
Connect the cables to appliance ports on the fabric interconnect
Reacknowledge the server.

Correct Answer: A

QUESTION 153
An engineer must create a new Cisco UCS user account to perform these actions:
1. Modify systems logs, faults, and power management settings.
2. View access to all other configuration in the UCS domain.

Which two roles must be assigned to the user to permit these actions? (Choose two.)

A. Facility Manager
B. Server Compute
C. Read-Only
D. Administrator
E. Operations

Correct Answer: AE

QUESTION 154
A network engineer is upgrading the EPLD on module 2 in a Cisco Nexus 9000 Series Switch. What is the impact on the traffic that passes through the module?

A. The traffic is diverted to another module.
B. The traffic continues to flow normally through the module
C. The traffic is disrupted on the target module.
D. The traffic is diverted to a supervisor module.

Correct Answer: C

QUESTION 155
The network team needs permissions to access the Cisco UCS B-Series Servers via the Cisco UCS Manager GUI to configure the network and collect information about faults. The administrator wants to assign these permissions to the newly configured user called netops. Which set of tasks must the administrator perform to accomplish these goals?

A. Deploy username netops on the users locales
Assign the roles of networks security and facility manager.
B. Implement username netops on the locally authenticated user.
Assign the roles of network administrator and operations.
C. Configure username netops on the Cisco UCS Manager login profile.
Assign the roles of AAA administrator and operations.
D. Enable username netops on the authenticated users.
Assign the roles of storage administrator and facility manager.

Correct Answer: B

QUESTION 156
A Cisco UCS user called “Employee1” accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles, and their storage connectivity was lost The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies. Which action must be taken to meet these requirements?

A. Modify the privilege level assigned to the user.
B. Assign users to a specific Cisco UCS locale.
C. Assign the user “Employee1” the network-operator role.
D. Define a custom user role and assign it to users.

Correct Answer: D

QUESTION 157
An engineer is configuring a VHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.)

A. WWNN
B. WWPN Pool
C. MAC addresses
D. VLAN ID
E. Fabric ID

Correct Answer: BE

QUESTION 158
Which feature is supported with an In-Service Software Upgrade on a Cisco Nexus 9000 Series Switch?

A. zero downtime downgrades via dual supervisor modules
B. upgrades to individual modules and line cards
C. nondisruptive upgrades via nonstop forwarding
D. configuration changes during an upgrade

Correct Answer: C

QUESTION 159
A network engineer must deploy a configuration backup policy to the Cisco UCS Manager. The file generated from this backup must have a snapshot of the entire system that should be used to restore the system during disaster recovery. The backup file must be transferred insecurely by using the TCP protocol. Which configuration backup settings meet
these requirements?

A. Type: Logical Configuration
Protocol: SFTP
B. Type: All Configuration
Protocol: SCP
C. Type: System Configuration
Protocol: TFTP
D. Type: Full State
Protocol: FTP

Correct Answer: D

QUESTION 160
An engineer mut implement a VXLAN-based data center interconnect. The long-distance transport provided by a service provider is IP-based supports a maximum MTU of 1554 bytes and does not support outbound traffic replication. Which action must be taken to build the data center interconnect?

A. Configure a route map to associate the IPs of the remote VTEPs.
B. Announce host reachability over BGP.
C. Implement BGP EVPN ingress replication.
D. Create an IP access list and associate it with VNI to replicate traffic to remote VTEPs.

Correct Answer: C