QUESTION 41
Which component is managed by the user in the PaaS model?
A. servers
B. virtualization
C. application
D. networking
Correct Answer: C
QUESTION 42
What type of API interface is used to manage UCS-X in Intersight Managed Mode?
A. Stateful
B. RESTful
C. GraphQL
D. WebSocket
Correct Answer: B
QUESTION 43
Which storage solution allows multiple users to access files directly on a storage array over a LAN network?
A. storage area network
B. network-attached storage
C. direct attached storage
D. network file system
Correct Answer: B
QUESTION 44
A network engineer needs a tool to automate the provisioning of Cisco UCS Service Profiles. The administrator has limited programming knowledge but is skilled with scripting tools. The tool must include existing support for Cisco UCS configuration. Additionally, the administrator will eventually use the solution to manage Cisco UCS C-Series Rack Servers. Which tool meets these requirements?
A. Bash scripts
B. Python scripts
C. Cisco DCNM
D. PowerShell
Correct Answer: D
QUESTION 45
The Cisco TACACS+ on a Cisco Nexus Series Switch must authenticate any user attempting to access the device and fail over to the local account if the TACACS + sever becomes unavailable. Which command accomplishes these goals?
A. aaa authentication login console local
B. aaa authentication login default local
C. aaa authentication login console fallback error local
D. aaa authentication login default fallback error local
Correct Answer: D
QUESTION 46
A company plans to migrate some of its services to the cloud. The company does not want to manage or control the underlying cloud infrastructure. It also wants to maintain control over the deployment of its applications and configuration settings of the application-hosting environment. Which cloud service model meets these requirements?
A. Infrastructure as a Service
B. Function as a Service
C. Platform as a Service
D. Software as a Service
Correct Answer: C
QUESTION 47
An engineer updated firmware on Fabric Interconnects and activates it. However, the endpoint fails to boot from the new firmware image. What is expected to occur in this case?
A. The system defaults to the GOLD firmware image
B. The system defaults to the backup image version
C. The system defaults to and boots into kickstart image
D. The system defaults to and boots into GOLD firmware image
Correct Answer: B
QUESTION 48
An engineer must perform a backup and restore in Cisco UCS to rebuild the system in a disaster recovery scenario. The backup file must be encrypted to prevent the passwords from being stored as cleartext. Which backup configuration meets these requirements?
A. Full state backup over TFTP
B. System configuration backup over FTP
C. Logical configuration backup over SCP
D. All configuration backup over SFTP
Correct Answer: A
QUESTION 49
What is the advantage of using the NFS protocol versus the iSCSI or FCoE SAN protocols?
A. NFS natively provides encryption as the default.
B. NFS is more sensitive to latency.
C. NFS provides easy file sharing.
D. NFS requires an AAA server.
Correct Answer: C
QUESTION 50
An engineer must migrate the Cisco UCS Manager configuration from an old system to a new one. The requirement is to migrate only the configuration of the servers, and use different network and administration settings. Which backup type meets the requirements?
A. All configuration
B. Full state
C. System configuration
D. Logical configuration
Correct Answer: D
QUESTION 51
Which Cisco UCS Manager XML encoded backup type must be used to back up user names, roles, and service profiles?
A. All Configuration
B. Full State Configuration
C. System Configuration
D. Logical Configuration
Correct Answer: C
QUESTION 52
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc1/1-12 and then for ports fc1/13-24 for the next 60 seconds. Ports in the range fc1/13-24 were already enabled for analytics. Which set of commands must be used to meet these requirements?
A. analytics port-sampling module 1 size 12 interval 60000
interface fc1/1-12
analytics fo-scsi
analytics fc-nvme
B. interface fc1/1-12
port-sampling module 1 size 12 interval 60
analytics nvme
C. interface fc1/1-12
port-sampling module 1 size 12 interval 60000
analytics type fc-scsi
D. analytics port-sampling module 1 size 12 interval 60
interface fc1/1-12
analytics type fc-nvme
Correct Answer: D
QUESTION 53
Which FC mode is the device MDS-9148S-2 operating in?
MDS-9148S-2# show interface port-channel 2
port-channel 2 is up
Hardware is Fibre Channel
Port WWN is
Admin port mode is NP, trunk mode is off
snmp link state traps are enabled
Port mode is NP
Port vsan is 11
Speed is 16 Gbos
1 minute input rate O bits/sec, 0 bytes/sec, 0 frames/sec
1 minute output rate 0 bits/sec, 0 bytes/sec, 0 frames/sec
0 discards, 0 errors
0 CRC, 0 unknown class
0 too long, 0 too short
A. FDISC
B. NPIV
C. FPMA
D. NPV
Correct Answer: D
QUESTION 54
An engineer must configure the RBAC role to perform these tasks in the Cisco UCS Manager:
1. Configure VLANs and VLAN groups.
2. Configure Ethernet Link Profile and LACP policy.
3. Specify the allowed range for virtual MAC addresses.
4. Configure SPAN Ethernet monitoring sessions.
Which set of permissions must be used to create a user role that accomplishes these roles?
A. ext-lan-security
Is-network
B. Is-server-oper
ext-san-policy
C. ext-lan-config
ext-lan-policy
D. Is-config
Is-ext-access
Correct Answer: C
QUESTION 55
An engineer upgrades the bash on the Cisco Nexus 9000 Series Switch.
guestshell:~$ sudo [MISSING_COMMAND] /bootflash/bash-4.2_x86_64.rpm.rpm
Preparing…
########################################### [100%]
1:bash ########################################### [100%]
update-alternatives: Linking //bin/sh to /bin/bash
Which command must be used to complete the task?
A. rpm -Uhv
B. rpm -qa
C. update -vh
D. upgrade –U
Correct Answer: A
QUESTION 56
An engineer must automate configuration for Cisco ACI objects using the Terraform tool. The engineer must ensure that the login request is never exceeded and users can attempt as many login attempts as necessary. Which configuration must be used in Terraform to meet these requirements?
A. resources with signature-based authentication
B. provider with signature-based authentication
C. resources with user ID and password
D. provider with user ID and password
Correct Answer: D
QUESTION 57
A network engineer must configure a PC on a pair of Cisco Nexus switches connected to a third-party load balancer. The connection must meet these requirements:
1. The port channel must be negotiated with the load balancer via an open standards protocol.
2. Traffic that is sent directly to the physical MAC address of the other peer switch must be forwarded locally by the receiving switch.
Which command set accomplishes these goals?
A. vpc domain 10
peer-switch
interface Eth1/1
channel-group 1 mode on
B. vpc domain 10
peer-gateway
interface Eth1/1
channel-group 1 mode on
C. vpc domain 10
peer-gateway
interface Eth1/1
channel-group 1 mode active
D. vpc domain 10
peer-switch
interface Eth1/1
channel-group 1 mode active
Correct Answer: C
QUESTION 58
An engineer must create a scheduler configuration to create two backup jobs per day. The backup file must be copied to a server in the operations VRF. Which configuration accomplishes this task?
A. scheduler schedule name CNFGBACKUP
job name BACKUP-JOB
copy running-config tftp:/10.19.11.12/$(SWITCHNAME)-$(TIMESTAMP).cfg vrf operations
time start now repeat 12:00
B. scheduler schedule name CNFGBACKUP
job name BACKUP-JOB
copy vrf operations contig tftp:/10.19.11.12/$(SWITCHNAME)-$(TIMESTAMP).cfg
time start 12:30 repeat 12
C. scheduler schedule name CNFGBACKUP
job name BACKUP-JOB
show tech-support | redirect vrf operations tftp:/10.19.11.12/$(SWITCHNAME)-$(TIMESTAMP).cfg
time start daily 12:30 0:30
D. scheduler schedule name CNFGBACKUP
job name BACKUP-JOB
copy startup.config tftp:/10.19.11.12/$(SWITCHNAME)-$(TIMESTAMP).cfg
time daily 12:30 0:30
Correct Answer: A
QUESTION 59
An engineer must configure a Cisco MDS 9000 Series Switch to store generated log messages to a file. The file must store logs of the severity of “warning” and above, and the file size must not exceed 20,000 bytes. Which command accomplishes this task?
A. logging logfile Local 4 size 20000
B. logging logfile Logs 3 size 160000
C. logging logfile messages 2 size 2500
D. logging logfile LogFile 5 size 2000
Correct Answer: A
QUESTION 60
An engineer must back up the running configuration of a Cisco Nexus 9000 Series Switch securely to a remote server. Which protocol must be used to accomplish this goal?
A. HTTPS
B. SCP
C. FTP
D. TFTP
Correct Answer: B