QUESTION 21
Nexus01# install all epld n9000-epld.9.2.4.img

Refer to the exhibit. What occurs when the command shown is run on a Cisco Nexus 9000 Series Switch?

A. It shows the impact of the electronic programmable logic device upgrade on the operation of the switch.
B. It shows the compatibility of the electronic programmable logic device upgrade and the switch.
C. It triggers a simulated upgrade of the electronic programmable logic device on the switch.
D. It triggers a disruptive upgrade of the electronic programmable logic device on the switch.

Correct Answer: D

QUESTION 22
An administrator must configure a Cisco UCS C-Series Server to:
1. Use the LAN On Motherboard ports for accessing the Cisco IMC.
2. Provide multiple paths to the Cisco IMC.
3. Increase throughput.

Which pair of settings meets these requirements?

A. NIC redundancy as active-standby
NIC mode as Shared
B. NIC mode as active-active
NIC redundancy as Shared
C. NIC mode as active-standby
NIC redundancy as Shared
D. NIC redundancy as active-active
NIC mode as Shared
Correct Answer: D

QUESTION 23
Which maintenance policy setting must be used to avoid an immediate reboot of the server when disruptive changes happen to the service profile?

A. user acknowledgment
B. host firmware
C. firmware auto sync
D. default

Correct Answer: A

QUESTION 24
What is the impact of upgrading the CIMC firmware in a Cisco UCS C-Series Server?

A. KVM sessions remain connected.
B. IPMI polling is interrupted.
C. I/O module reboots immediately.
D. Fabric interconnects restart.

Correct Answer: B

QUESTION 25
An engineer must back up the configuration of the Cisco UCS fabric interconnects for disaster recovery. The backup must be used to restore the configuration during the initial console configuration. Which backup type must the engineer select to meet these requirements?

A. all configuration
B. system configuration
C. logical configuration
D. full state

Correct Answer: D

QUESTION 26
Which two statements describe the process of upgrading an EPLD on a Cisco MDS 9000 Series Switch? (Choose two.)

A. The EPLDs for all the modules on a switch must be upgraded at the same time.
B. EPLD upgrades are capable to be completed without powering down the module during the upgrade.
C. EPLDs are only capable to be upgraded only to the latest EPLD image.
D. EPLDs are capable to be upgraded without replacing the hardware.
E. An upgrade varication identifies the impact of each EPLD upgrade

Correct Answer: DE

QUESTION 27
Which component is, by default, excluded from the host firmware package on a Cisco UCS B-Series Server?

A. network interface controller
B. local disk
C. board controller
D. storage controller

Correct Answer: D

QUESTION 28
An engineer must integrate Cisco ACI with vMware vCenter. The virtualization team configured the necessary port groups and assigned them to virtual machines through VMware vCenter. The final port group configuration must be protected from being changed by Cisco APIC. Which action accomplishes these goals?

A. Create the VMM domain with switch mode set to AVE.
B. Activate CDP and LLDP in the VMM domain.
C. Configure the VIM domain with tag collection.
D. Set the VMM domain access mode to Read Only Mode.

Correct Answer: D

QUESTION 29
An engineer installed the group of Cisco Nexus switches 93180YC-FX3. The engineer planned to use the Cisco NX-OS nxos64-cs.10.2.4.M.bin as a software image. The engineer must use a Python script to automate the upgrade of all switches when powered on. Which design action must be taken to accomplish this goal?

A. Install the Cisco NX-OS Software image on the DHCP server.
B. Deploy the configuration script on the DHCP server.
C. Deploy the configuration script on the TFTP server.
D. Install the Cisco NX-OS Software image on the TFTP server.

Correct Answer: D

QUESTION 30
How does a modular Cisco Nexus 9000 Series Switch handle an in-service software (ISSU) upgrade as compared to a nonmodular switch?

A. Nonmodular switches support rolling upgrades, and modular switches do not.
B. Modular switches need manual intervention for an ISSU, and nonmodular switches upgrade automatically.
C. Modular switches require a complete halt of traffic on all modules during an ISSU.
D. An ISSU on modular switches can be done without traffic disruption due to dual supervisor engines.

Correct Answer: D

QUESTION 31
A Cisco UCS Manager must be configured with four RADIUS servers. Which action permits Cisco UCS Manager to use RADIUS authentication from all four RADIUS servers before login?
A. Add four provider groups under four RADIUS servers and four authentication domains under four provider groups.
B. Add four RADIUS servers under a single authentication domain and a single authentication domain under single provider group.
C. Add four RADIUS servers under a single provider group and a single provider group under a single authentication domain.
D. Add four RADIUS servers under four authentication domains and a single provider group under four authentication domains.

Correct Answer: C

QUESTION 32
What is a characteristic of a cloud computing model according to NIST special publication 800-145?

A. limited resource pooling
B. on-demand self-service
C. fixed computing capabilities
D. decentralized management of resources

Correct Answer: B

QUESTION 33
Which storage technology provides a simple, high-capacity solution and offers a direct file-access level to the shared storage?

A. FCP
B. NFS
C. FCOE
D. iSCSI

Correct Answer: B

QUESTION 34
Which technology provides RDMA functionality if the requirements are to support high bandwidth options and keep traffic separate from other network traffic?

A. RoCEv2
B. InfiniBand
C. NVMe-oF
D. RoCEv1

Correct Answer: B

QUESTION 35
An engineer must configure a role-based access control in Cisco Unified Computing System Manager to provide access to a network analyst. The analyst must configure syslog servers and review the system logs. Which two default user roles must be assigned to the network analyst to allow these permissions? (Choose two.)

A. Network Administrator
B. Facility Manager
C. AAA Administrator
D. Server Security Administrator
E. Operations

Correct Answer: AE

QUESTION 36
What is the impact of upgrading the firmware of the Cisco UCS Manager?

A. The connected user is logged out and the session is ended.
B. The connectivity to the fabric interconnects using RDP is unavailable.
C. Fault suppression is triggered when the upgrade process starts.
D. The UDP packets destined for the primary fabric interconnect are dropped.

Correct Answer: A

QUESTION 37
How does UCS-X achieve high availability for management components?

A. by using redundant UCS Managers
B. through dual fabric interconnects
C. with multiple UCS Directors
D. by deploying multiple Intersight instances

Correct Answer: B

QUESTION 38
Which package type must be installed to provide enhanced hardware functionality on a Cisco Nexus 9000 Series Switch?

A. Cisco NX-OS package
B. software maintenance upgrade
C. electronic programmable logic device
D. kickstart image

Correct Answer: C

QUESTION 39
How does UCS-X achieve high availability for management components?

A. with multiple UCS Directors
B. by using redundant UCS Managers
C. through dual fabric interconnects
D. by deploying multiple Intersight instances

Correct Answer: C

QUESTION 40
Which item is used within the InfiniBand fabric to manage all communication paths and assign LIDs?

A. routing protocols
B. host channel adapter
C. subnet manager
D. InfiniBand router

Correct Answer: C