QUESTION 181
Which Intersight component must be deployed to the customer’s environment to enable connectivity from an Intersight SaaS instance to an on-premises instance of VMware Center?
A. Intersight Cloud Proxy
B. Intersight Connected Appliance
C. Intersight Device Connector
D. Intersight Assist
Correct Answer: A
QUESTION 182
Which event takes place when upgrading a Cisco Nexus MDS 9000 Series Switch with dual supervisor modules?
A. The new code is loaded on the standby supervisor then on the active.
B. The new code is loaded on the active supervisor then on the secondary.
C. The old code is removed from the backup supervisor then from the primary.
D. The old code is removed from the primary supervisor module then from the standby.
Correct Answer: D
QUESTION 183
What is an advantage of using Network File System (NFS) rather than Storage Area Network (SAN)?
A. NFS supports booting the operating system.
B. NFS supports more types of file systems.
C. NFS has lower latency than SAN.
D. NFS allows direct file access.
Correct Answer: D
QUESTION 184
A network engineer deploys a Cisco Unified Computing System C-Series Server in standalone mode. The engineer must ensure that the secondary vNIC is used as a fallback if a failure occurs on the primary vNIC. The server must then revert to using the primary vNIC if the failure is resolved in less than five minutes. Which two actions must be taken on the server? (Choose two.)
A. Enable uplink failover.
B. Set Failback Timeout.
C. Configure Class of Service.
D. Set the default VLAN on the vNICs.
E. Disable VNTAG mode.
Correct Answer: AB
QUESTION 185
A Cisco Unified Computing System environment must be configured for a server that requires access to VLAN 30 for data and VLAN 40 for management. The server must have failover capabilities. The upstream connectivity will be provided by using a Cisco Nexus 9000 Series Switch. Which action must be taken to meet these requirements?
A. Create a virtual network interface card for each VLAN and configure the host to use load balancing.
B. Use a single virtual network interface card for both VLANs and apply a network control policy for prioritization.
C. Create a virtual network interface cards for each VLAN and enable vNIC fabric failover.
D. Use a single virtual network interface card for both VLANs and assign the vNIC to a dynamic LAN pin group.
Correct Answer: C
QUESTION 186
In a data center based on Cisco Nexus 9000 Series Switches, all endpoints support explicit congestion notifications. How does the Nexus switch respond when the ECN-enabled queue reaches the maximum WRED threshold?
A. All the outgoing packets are marked.
B. Low-priority incoming packets are dropped.
C. A pause frame is sent to the source.
D. A congestion notification packet is sent to the sender.
Correct Answer: D
QUESTION 187
What is the effect of enabling Skip Validation in the Cisco UCS Auto Install process?
A. The firmware image of Cisco UCS is not installed.
B. The upgrade process of Cisco UCS fails to complete.
C. Cisco UCS Manager does not report issues with the upgrade.
D. Users that are logged in to Cisco UCS Manager are logged out.
Correct Answer: C
QUESTION 188
An engineer must implement a Python script to manage Cisco Application Centric Infrastructure (ACI) and endpoint groups. Which Python libraries must be used to parse responses and send requests to Cisco ACI?
A. JSON and ElementTree
B. ElementTree and SSL
C. JSON and requests
D. socket and JSON
Correct Answer: C
QUESTION 189
What is a disadvantage of deploying network-attached storage (NAS) versus Fibre Channel for storage?
A. NAS lacks the scalability and performance of Fibre Channel.
B. NAS centralizes storage devices, which makes them easier to manage.
C. NAS is more complex and expensive to implement.
D. NAS operates independently of an organization’s operating system.
Correct Answer: A
QUESTION 190
What is the effect of using firmware auto sync server policy in Cisco UCS Manager?
A. The server automatically reboots when the upgrade completes.
B. The Cisco UCS domain activates without need for a complete firmware upgrade.
C. The firmware is automatically upgraded after administrator acknowledgment.
D. UCS Manager does not report issues with the upgrade process.
Correct Answer: C
QUESTION 191
An administrator in UCS Manager must enable its users to reboot and decommission the servers and perform backup jobs. Which set of user privileges permits these activities?
A. Is-network
ext-lan-security
B. Is-server-oper
Is-security
C. Is-storage
Is-contig
D. operations
pn-maintenance
Correct Answer: D
QUESTION 192
What is the primary purpose of a UCS Domain Profile in Intersight Managed Mode?
A. It provides a centralized repository for US Manager backups.
B. It creates the common configuration for a group of fabric interconnects.
C. It manages individual service profiles for UCS servers.
D. It orchestrates data center operations across multiple domains.
Correct Answer: B
QUESTION 193
Which feature differentiates Intersight Managed Mode from UCSM Managed Mode when configuring and managing a Cisco UCS-X Series Modular System?
A. It supports up to 200 servers in the same UCS domain.
B. It decouples the management software from the infrastructure.
C. It provides full visibility of the UCS chassis components.
D. It consolidates all the events and alerts from the fabric interconnects.
Correct Answer: B
QUESTION 194
An engineer must configure Protocol Independent Multicast (PIM) on two Cisco Nexus 9000 Series Switches. The network already has a bootstrap router PIM configuration to be used on the switches. The configuration must support multiple diferent rendezvous points (RPs) and use RFC 4610. Which type of RP must be used to accomplish these goals?
A. static
B. Anycast-RP
C. Auto-RP
D. MSDP-RP
Correct Answer: B
QUESTION 195
What is the primary benefit of using Intersight Managed Mode (IMM) in Cisco UCS deployments?
A. It provides direct hardware access for BIOS configuration.
B. It enables centralized, cloud-based management of UCS infrastructure.
C. It replaces UCS Manager with a physical appliance.
D. It eliminates the need for UCS fabric interconnects.
Correct Answer: B
QUESTION 196
An architect must select a scripting language for automating Cisco Nexus Series Switches and Cisco Ucs Manager. The language must comply with these requirements:
1. Can run in interactive mode for testing
2. Can be run from different operating systems without changing code
3. Extensible with a diverse set of libraries
Which scripting language meets these requirements?
A. TCL
B. JavaScript
C. Python
D. Bash
Correct Answer: C
QUESTION 197
What is the impact of an electronic programmable logic device upgrade on a Cisco MDS 9000 Series Director Switch with dual supervisors?
A. The upgrade is aborted if any module is unsupported.
B. A manual reboot is required for each supervisor.
C. Nondisruptive upgrades without traffic interruptions can be performed.
D. A complete system reboot is triggered.
Correct Answer: C
QUESTION 198
Which protocol is used by a Cisco NX-OS device to send telemetry data that is encoded by GPB?
A. OPENSSL
B. gRPC
C. HTTP
D. JSON
Correct Answer: B
QUESTION 199
Which technology provides the capability to transfer data into the memory of another device without involving the CPU?
A. DWDM
B. RDMA
C. InfiniBand
D. NVMe-oF
Correct Answer: B
QUESTION 200
An engineer must deploy a UCS-X platform to a customer that requires an air gap between their management systems and the internet. Which Intersight deployment option must be used to accomplish this goal?
A. Intersight Assistant
B. Intersight Connected Appliance
C. Intersight Private Appliance
D. Intersight Secure Appliance
Correct Answer: C