QUESTION 121
An administrator is configuring Meet-me conferencing in a Cisco UCM deployment and has created the Meet-me number and ensured that it is in a partition accessible by all devices. Which two additional steps must the administrator perform? (Choose two.)

A. Update the softkey template on all phones to ensure that they contain the Meet-me softkey.
B. Ensure that conferencing-initiating devices are using a media resource group list that contains at least one Cisco UCM conference bridge.
C. Ensure that all devices have G.729 enabled.
D. Disable Early Media on the SIP profile of all devices that will use Meet-me conferencing.
E. Enable Meet-me conferencing in enterprise parameters.

Correct Answer: AB

QUESTION 122
Which elements does Cisco cloud mobility for collaboration include?

A. Cisco Collaboration Cloud and Cisco Webex Collaboration Cloud Services
B. Cisco Collaboration Cloud and Cisco Mobile and Remote Access Collaboration Cloud Services
C. Cisco Webex Collaboration Cloud Services
D. Cisco Collaboration Cloud

Correct Answer: C

QUESTION 123
An SRST site must use pickup functionality on the Chicago remote site to allow the users to take incoming calls. The pickup command is configured under the call-manager-fallback section on the SRST router. What are two results of that configuration? (Choose two.)

A. Calls that come into one directory number can be picked up from another directory number.
B. Calls that come into a Cisco UCM registered phone can be picked up by a SRST phone.
C. The PickUp soft key is on all SRST phones.
D. Calls that ring an unassigned directory number are forwarded to the auto-attendant.
E. The PickUp soft key is on all SRST phones.

Correct Answer: AE

QUESTION 124
End users at a new site report being unable to hear the remote party when calling or being called by users at headquarters. Calls to and from the PSTN work as expected. To investigate the SIP signaling to troubleshoot the problem, which field can provide a hint for troubleshooting?

A. Contact: header of the 200 OK response
B. Allow: header if the 200 OK response
C. o= line of SDP content
D. c= line of SDP content

Correct Answer: D

QUESTION 125
What is the relationship between partition, time schedule, and time period in Time-of-Day routing in Cisco UCM?

A. A partition can have multiple time schedules assigned. A time schedule contains one or more time periods.
B. A partition can have one time schedule assigned. A time schedule contains one or more time periods.
C. A partition can have multiple time schedules assigned. A time schedule contains only one time period.
D. A partition can have one time schedule assigned. A time schedule contains only one time period.

Correct Answer: B

QUESTION 126
What are two configuration feature of the Client Matter Code setting in the route pattern configuration? (Choose two.)

A. The Client Matter Code feature does not support overlap sending since the Cisco UCM cannot determine when to prompt the user for the code.
B. Selecting the Allow Overlap Sending setting disables the Require Client Matter Code setting.
C. Selecting the Allow Overlap Sending setting allows a user to select the Require Client Matter Code setting.
D. The Client Matter Code feature supports overlap sending since the Cisco UCM can determine when to prompt the user for the code.
E. The Client Matter Code feature provides the option to configure Authorization Level such as in the Forced Authorization Code.

Correct Answer: AB

QUESTION 127
A user’s phone is already configured for Single Number Reach, and the user wants a feature to move an active call from a mobile phone to a desk phone and vice-versa. As an administrator, which additional configuration should be made to fulfill the user’s request?

A. Add the mobility key to the softkey template that the desk phone is using.
B. Check to make sure that the Resume softkey option appears on the desk phone.
C. Confirm that the desk phone is subscribed to Cisco Extension Mobility.
D. Use Dialed Number Analyzer to determine if the user extension can dial the mobile phone.

Correct Answer: A

QUESTION 128
A customer routes PSTN calls to ITSP through a SIP trunk on Cisco UCM that forwards and receives calls to and from ITSP. ITSP is set to send an E.164 number when the customer’s extension is four digits. Which action should be taken to route the incoming calls to four-digit extensions?

A. Set the Significant Digits to 4 on the SIP trunk
B. Configure a voice translation rule to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.
C. Configure a voice translation profile to map the E.164 number to four digits and assign it to the incoming dial-peer on Cisco Unified Border Element.
D. Set the Significant Digits to 8 on the SIP trunk.

Correct Answer: A

QUESTION 129
The SIP session refresh timer allows the RTP session to stay active during an active call. The Cisco UCM sends either SIP-INVITE or SIP-UPDATE messages in a regular interval of time throughout the active duration of the call. During a troubleshooting session, the engineer finds that the Cisco UCM is sending SIP-UPDATE as the SIP session refresher, and the engineer would like to use SIP-INVITE as the session refresher. What configuration should be made in the Cisco UCM to achieve this?

A. Increase Retry INVITE to 20 seconds on the SIP profile.
B. Enable SIP Rel1XX Options on the SIP profile.
C. Change Session Refresh Method on the SIP profile to INVITE.
D. Enable Send send-receive SDP in mid-call INVITE on the SIP profile.

Correct Answer: C

QUESTION 130
An engineer has temporarily disabled toll fraud prevention for SIP line calls on a Cisco CME12.6x and must enforce security and toll fraud prevention for the SIP line side on Cisco Unified CME. Which configuration must be used to start this process?

A. voice service voip
enable ip address trust list
B. voice service voip
enable ip address trust authentication
C. voice service voip
ip address trusted list
D. voice service voip
ip address trusted authenticate

Correct Answer: D

QUESTION 131
An engineer must configure a Cisco UCM hunt list so that calls to users in a line group are routed to the first idle user and then the next Which distribution algorithm must be configured to accomplish this task?

A. circular
B. top down
C. longest idle time
D. broadcast

Correct Answer: B

QUESTION 132
An administrator configured Cisco Unified Mobility to block access to remote destinations for certain caller IDs. A user reports that a blocked caller was able to reach a remote destination. Which action resolves the issue?

A. Configure a mobility identity.
B. Configure Single Number Reach.
C. Configure Mobile Voice Access.
D. Configure an access list.

Correct Answer: D

QUESTION 133
A customer has multisite deployments with a globalized dial plan. The customer wants to route PSTN calls via the gateway assigned to each site. Which two actions will fulfill the requirement? (Choose two.)

A. Create one global route list for PSTN calls that points to one global PSTN route group.
B. Create a hunt group and assign it to each side route pattern.
C. Create one route group for each site and one global route list for PSTN calls that point to the local route group.
D. Assign one route group as a local route group in the device pool of the corresponding site.
E. Create a route group which has all the gateways and associate it to the device pool of every site.

Correct Answer: CD

QUESTION 134
Management wants to change the initial announcements for one of the existing call hunt groups. A new set of announcement audio files was provided. Which two configuration steps must the administrator take to accomplish this change? (Choose two.)

A. Identify the MOH audio source ID associated to one of the line group member’s “Network Hold MOH Audio Source.”
B. Identify the MOH audio source ID associated to” Network Hold MOH Source & Announcements” under the Queuing section of the hunt pilot.
C. Identify the configured announcement names to change under the MOH audio Source section, then upload the new files to the respective announcements under the Announcement section.
D. Identify the MOH audio source ID associated to one of the line group member’s “User Hold MOH Audio Source”.
E. Identify the configured announcement names to change under the Announcement section, and assign the uploaded files to the Queuing section of the hunt pilot.

Correct Answer: BE

QUESTION 135
An organization has decided to implement hunt groups to help with the distribution of calls between different members. The administrator must configure hunt groups on Cisco UCM. In the configuration, at which step does an administrator have the option to configure a distribution algorithm (top down, circular, longest idle time, broadcast)?

A. route list
B. hunt group
C. line hunt list
D. hunt list

Correct Answer: B

QUESTION 136
An administrator deployed a third-party H.323 gateway in a voice environment, but users report call failures when using features like call hold or call transfer. What are two reasons that these features fail? (Choose two.)

A. The Media Resource Group List of the H.323 gateway contains only transcoders and conference bridges but no MTP.
B. The MTP that is configured for use within the H.323 gateway configuration is configured as a trusted source, but the third-party gateway does not trust the signing root CA certificate of the MTP certificate.
C. The MTP does not support the negotiated codec, and media renegotiating during the call is not supported.
D. The third-party gateway does not support supplementary features, so Media Termination Point (MTP) must be inserted.
E. The CSS of the transfer initiating line does not contain the partition of the supplementary feature extension (DirectTransfer or MoH Number).

Correct Answer: CD

QUESTION 137
A company was looking at the IT charges and saw many long-distance and international calls primarily to sites in North America and around the world. The administrator wants to optimize the PSTN expense. Which dial plan configuration reduces PSTN connectivity charges by using the IP network to bring the egress point to the PSTN as close as possible to the called number?

A. translation patterns
B. dial rules
C. tail end hop off
D. client matter codes

Correct Answer: C

QUESTION 138
When an administrator troubleshoots H.323 call setup, which message gives an alert that the called party is being notified about the call?

A. ALERTING
B. CONNECT
C. PROCEEDING
D. RINGING

Correct Answer: A

QUESTION 139
An IP Telephony administrator is deploying IP phones. The administrator has an existing Cisco UCME router with several SCCP & SIP phones registered. The administrator receives a request for a new SIP phone with MAC address 1111.2222.3333 and directory number 2050 to be added in the Cisco UCME. Which two configurations should be added in CME to support this request? (Choose two.)

A. voice register pool 1
id mac 1111.2222.3333
type 8941
number 2 dn 1
B. voice register pool 1
id mac 1111.2222.3333
type 8941
number 1 dn 2
C. ephone 1
mac-address 1111.2222.3333
type 8941
button 1:2
D. voice register dn 2
number 2050
E. ephone-dn 2
number 2050

Correct Answer: BD

QUESTION 140
An administrator troubleshoots call failure in a new deployment and finds that the SIP INVITE messages sent to the service provider contain a diversion header with the user’s 4-digit directory number. These 4-digit directory numbers range from 1000 to 9999. The service provider is rejecting the calls because it requires that the diversion header contain 10 digits. Which command on the Cisco Unified Border Element resolves this issue for all users?

A. voice class sip-profiles 105
request INVITE sip-header Diversion modify “<sip:1(…)@”
<sip:2634112@”
B. voice class sip-profiles 105
request INVITE sip-header Diversion modify “<sip:(….)@”
“<sip:2634111@”
C. voice class sip-profiles 105
request INVITE sip-header Diversion modify “<sip:1(…)@”
“<sip:2634111@”
D. voice class sip-profiles 105
request INVITE sip-header Diversion add “<sip:(……)@”
“<sip:2634111@”

Correct Answer: B