QUESTION 181
In a fabric-enabled wireless network, which device is responsible for maintaining the endpoint ID database?

A. fabric border node
B. fabric edge node
C. fabric wireless controller
D. control plane node

Correct Answer: D

QUESTION 182
Which method displays text directly into the active console with a synchronous EEM applet policy?

A. event manager applet boom
event syslog pattern ‘UP’
action 1.0 syslog priority direct msg ‘logging directly to console’
B. event manager applet boom
event syslog pattern ‘UP’
action 1.0 gets ‘logging directly to console’
C. event manager applet boom
event syslog pattern ‘UP’
action 1.0 puts ‘logging directly to console’
D. event manager applet boom
event syslog pattern ‘UP’
action 1.0 string ‘logging directly to console’

Correct Answer: C

QUESTION 183
In a Cisco SD-Access wireless environment, which device is responsible for hosting the anycast gateway?

A. fusion router
B. control plane node
C. fabric border node
D. fabric edge node

Correct Answer: D

QUESTION 184
An engineer must create an EEM script to enable OSPF debugging in the event the OSPF neighborship goes down. Which script must the engineer apply?

A. event manager applet ENABLE OSPF DEBUG
event syslog pattern “%OSPF-5-ADJCFHG: Process 5, Nbr 1.1.1.1 on Serlal0/0 from LOADING to FULL”
action 1.0 cli command “debug ip ospf event”
action 2.0 cli command “debug ip ospf adj”
action 3.0 syslog priority informational msg “ENABLE_OSPF_DEBUG”
B. event manager applet ENABLE OSPF DEBUG
event syslog pattern “%OSPF-5-ADJCHG: Process 6, Nbr 1.1.1.1 on Serlal0/0 from FULL to DOWN”
action 1.0 cli command “enable”
action 2.0 cli command “debug ip ospf event”
action 3.0 cli command “debug ip ospf adj”
action 4.0 syslog priority informational msg “ENABLE_OSPF_DEBUG”
C. event manager applet ENABLE_OSPF_DEBUG
event syslog pattern “%OSPF-1-ADJCHG: Process 5, Nbr 1.1.1.1 on Serial0/0 from FULL to DOWN°
action 1.0 cli command “debug ip ospf event”
action 2.0 cll command “debug ip ospf adj”
action 3.0 syslog priority informational msg “ENABLE_OSPF_DEBUG”
D. event manager applet ENABLE_OSPF_DEBUG
event syslog pattern”%OSPF-5-ADJCFG: Process 5, Nbr 1.1.1.1 on Serial0/0 from LOADING to FULL”
action 1.0 cli command “enable”
action 2.0 cli command “debug ip ospf event”
action 3.0 cli command “debug ip ospf adj”
action 4.0 syslog priority informational msg “ENABLE_OSPF_DEBUG”

Correct Answer: B

QUESTION 185
What does a YANG model provide?

A. standardized data structure independent of the transport protocols
B. creation of transport protocols and their interaction with the OS
C. user access to interact directly with the CLI of the device to receive or modify network configurations
D. standardized data structure that can be used only with NETCONF or RESTCONF transport protocols

Correct Answer: A

QUESTION 186
When does a Cisco StackWise primary switch lose its role?

A. when the priority value of a stack member is changed to a higher value
B. when a stack member fails
C. when the stack primary is reset
D. when a switch with a higher priority is added to the stack

Correct Answer: C

QUESTION 187
Which feature is used to propagate ARP, broadcast, and link-local frames across a Cisco SD-Access fabric to address connectivity needs for silent hosts that
require reception of traffic to start communicating?

A. Multisite Fabric
B. Layer 2 Flooding
C. Native Fabric Multicast
D. SDA Transit

Correct Answer: B

QUESTION 188
Which mechanism does OAuth use to strengthen REST API security when compared to BasicAuth?

A. SSL
B. TLS
C. Authentication
D. Token

Correct Answer: D

QUESTION 189
When using BFD in a network design, which consideration must be made?

A. BFD is used with dynamic routing protocols to provide subsecond convergence.
B. BFD is used with first hop routing protocols to provide subsecond convergence.
C. BFD is more CPU-intensive than using reduced hold timers with routing protocols.
D. BFD is used with NSF and graceful to provide subsecond convergence.

Correct Answer: A

QUESTION 190
Which data is properly formatted with JSON?

A. {
“name”:”Peter”
“age”:”25″
“likesJson”:true
“characteristics”:[“small”,”strong”,18]
}
B. {
“name”: “Peter”,
“age”: “25”,
“likesJson”: true,
“characteristics”: [“small”,”strong”,”18],
}
C. {
“name”: “Peter”,
“age”: “25”,
“likesJson”: true,
“characteristics”: [“small”,”strong”,18]
}
D. {
“name”: Peter,
“age”: 25,
“likesJson”: true,
“characteristics”: [“small”,”strong”,”18],
}

Correct Answer: C

QUESTION 191
Which design principle states that a user has no access by default to any resource, and unless a resource is explicitly granted, it should be denied?

A. least privilege
B. fail-safe defaults
C. economy of mechanism
D. complete mediation

Correct Answer: B

QUESTION 192
What is a capability of the Cisco DNA Center southbound API?

A. It sends webhooks from Cisco DNA Center when alerts are triggered.
B. It allows administrators to make API calls to Cisco DNA Center.
C. It adds support for managing non-Cisco devices from Cisco DNA Center
D. It connects to ITSM services such as ServiceNow.

Correct Answer: C

QUESTION 193
A response code of 404 is received while using the REST API on Cisco DNA Center to POST to this URI:
/dna/intent/api/v1/template-programmer/project
What does the code mean?

A. The server has not implemented the functionality that is needed to fulfill the request.
B. The client made a request for a resource that does not exist.
C. The request was accepted for processing, but the processing was not completed.
D. The POST/PUT request was fulfilled and a new resource was created. Information about the resource is in the response body.

Correct Answer: B

QUESTION 194
Which action is a function of VTEP in VXLAN?

A. tunneling traffic from IPv6 to IPv4 VXLANs
B. allowing encrypted communication on the local VXLAN Ethernet segment
C. encapsulating and de-encapsulating VXLAN Ethernet frames
D. tunneling traffic from IPv4 to IPv6 VXLANs

Correct Answer: C

QUESTION 195
Why would a network engineer configure an AP in SE-Connect mode?

A. to analyze the RF spectrum surrounding the AP
B. to connect the wired LAN with the wireless infrastructure
C. to monitor the VLAN traffic for rogue Aps
D. to redirect WLAN traffic to an endpoint for protocol analysis

Correct Answer: A

QUESTION 196
What is a characteristic of an AP that operates in FlexConnect mode?

A. Configuration is done directly on the AP rather than on a controller.
B. Dot1x authentication is not supported for AP clients in this mode.
C. FlexConnect groups are required to support 802. 11r fast roaming.
D. Client authentication is always performed on the AP.

Correct Answer: D

QUESTION 197
What are two characteristics of Cisco Catalyst SD-WAN? (Choose two.)

A. unified data plane and control plane
B. distributed control plane
C. centralized reachability, security, and application policies
D. control plane operates over DTLS/TLS authenticated and secured tunnels
E. time-consuming configuration and maintenance

Correct Answer: CD

QUESTION 198
Which Cisco SD-WAN component authenticates the routers and the vSmart controllers?

A. vEdge
B. vManage NMS
C. vBond orchestrator
D. vAnalytics

Correct Answer: C

QUESTION 199
Which type of API enables Cisco Catalyst Center (formerly DNA Center) to focus on outcome instead of the individual steps that are required to achieve the
outcome?

A. northbound Intent
B. westbound Integration
C. southbound Multivendor Support
D. eastbound Events and Notifications

Correct Answer: A

QUESTION 200
With IGMPv2, which multicast group address does the IGMP querier use to send query messages to all hosts on the LAN?

A. 239.0.0.1
B. 239.0.0.2
C. 224.0.0.1
D. 224.0.0.2

Correct Answer: C